Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

[2600 problem booting]

hi,

after performing a sw upgrade on a 2600, i got the following messages:

System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

TAC:Home:SW:IOS:Specials for info

C2600 platform with 49152 Kbytes of main memory

program load complete, entry point: 0x80008000, size: 0x9cea7c

*** Software Emulation Exception ***

PC = 0x80008d80, Vector = 0x1000, SP = 0x8000613c

monitor: command "boot" aborted due to exception

System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

TAC:Home:SW:IOS:Specials for info

C2600 platform with 49152 Kbytes of main memory

program load complete, entry point: 0x80008000, size: 0x9cea7c

*** Software Emulation Exception ***

PC = 0x80008d80, Vector = 0x1000, SP = 0x8000613c

monitor: command "boot" aborted due to exception

System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

TAC:Home:SW:IOS:Specials for info

C2600 platform with 49152 Kbytes of main memory

rommon 1 >

anybody have an idea what went wrong?

regards,

c.

1 REPLY
Community Member

Re: [2600 problem booting]

What version did you use for your upgrade? Have you backed up the original one? if you did, then tftp it again to see if it works. If yes, maybe your new ios has some problem.

119
Views
0
Helpful
1
Replies
CreatePlease to create content