2600 serial print setup

[armandos]

I have two sites that have a 2600 with 4 port serial cards and are connected via fram relay

How do I configure the router to setup site A with a

Wyse 50 Terminal on the network to print to a serial printer hooked up to one of the serial ports on site B.

[svermill]

If your serial interfaces are sync/async you could try an async tunnel:

http://www.cisco.com/warp/public/700/14.shtml

Never tried one though and never heard from anyone who actually has (at least not successfully). Let us know if you decide to try it. I'm hoping to myself someday soon but lab time has been limitted lately.