I have a 2600 which has 2 wic dsu T1 cards in it. I have use the ip load balancing comand on each serial interface. I removed ip cef, which brought the speed up alot on 1 T1 but the other is still the same.
1 parent T has 2600 download and 1300 upload and the other Child T has 2600 download and 900 upload.
I need to get 2600 both ways on both T's
Here is the config for the serial ports on the router:
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...