We have a 2610 router that was running IOS c2600-i-mz_120-5_t1.bin. This is used to access the internet (a 128k frame connection with Sprint). We had originally tried to upgrade the IOS to c2600-ik8s-mz.122-8.T4.bin and after loading it, we could not connect to the internet. We have since tried IOS versions c2600-ik8s-mz.122-6.bin & c2600-ik9o3s-mz.122-8.T5.bin with the same results. We have also tried a brand new 2610XM with the same results.
With the new IOS, when we ping www.yahoo.com, it resolves the DNS and then we get a reply timed out message 4 times. If we do a tracert to yahoo, it gets through sprint and almost all the way to yahoo before it get timed out.
We need to get the c2600-ik9o3s-mz.122-8.T5.bin IOS working on the 2610XM. Any ideas on what could be wrong? All access lists and configs appear to be identical.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...