Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2610 boot failure

Hi,

I've got a boot failure on the 2610 router.

I get only this message :

System Bootstrap, Version 11.3(2)XA3, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)

Copyright (c) 1998 by cisco Systems, Inc.

TAC:Home:SW:IOS:Specials for info

C2600 platform with 24576 Kbytes of main memory

It's a loop.

I can't get into rommon mode.

Any ideas ?

Thanks in advance

2 REPLIES
Cisco Employee

Re: 2610 boot failure

Whatever the reason, you might have to break-in manually to enter into ROMMON.

Below is URL for different break-sequence keys depending on the OS and the terminal software you are using:-

http://www.cisco.com/warp/public/701/61.html

Once you are in ROMMON, use the following URL to perform recovery;

http://www.cisco.com/warp/public/130/recovery_c2600.html

HTH

R/Yusuf

New Member

Re: 2610 boot failure

Hi,

Thanks a lot, I'm in ROMMON mode.

I used tftpdnld to upload an IOS image, this is the output I've got

File reception completed.

Copying file c2600-i-mz.122-10a.bin to flash.

Erasing flash at 0x60200000sectÿ

System Bootstrap, Version 11.3(2)XA3, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)

Copyright (c) 1998 by cisco Systems, Inc.

TAC:Home:SW:IOS:Specials for info

C2600 platform with 24576 Kbytes of main memory

device does not contain a valid magic number

boot: cannot open "flash:"

boot: cannot determine first file name on device "flash:"

Any ideas ?

Thanks in advance

108
Views
0
Helpful
2
Replies
CreatePlease to create content