Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

2610 Tunneling of serial propriatary data

I am trying to Tunnel propriatary Serial data from one device to another accross a WAN via Cisco 2610 routers on each side. Has anyone did this or know where I can find configuration examples for this application?

Thank you

Rick Payne

2 REPLIES
Cisco Employee

Re: 2610 Tunneling of serial propriatary data

Here's an example of how this can be achieved.

http://www.cisco.com/en/US/partner/tech/tk801/tk36/technologies_configuration_example09186a0080160c4d.shtml

Hope this helps,

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México 
Paseo de la Reforma 222 Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
New Member

Re: 2610 Tunneling of serial propriatary data

Rick,

Try this config on both switches

Interface tunnel 0

ip unnumbered ethernet0 <--or interface on internal

tunnel source ethernet0 <--or interface on internal traffic to tunnel

tunnel destination x.x.x.x <--remote router

!

ip route x.x.x.x x.x.x.x tunnel0 <--destination network of tunneled data

77
Views
0
Helpful
2
Replies