Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

2621 Router Help

Can somebody please help. I have erased my flash image on my 2621 router. I have a copy saved to a tftp server, but i am having trouble reloading it. When i turn the router on it says that there is no flash image. How can i use the "tftpdnld" command to reload my IOS flash image. Please help.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: 2621 Router Help

You can follow this link

There are 5 parameters that needs to be set before using tftpdnld.

Those parameters should be entered exactly asis in the document.

http://www.cisco.com/en/US/products/hw/routers/ps259/products_installation_guide_chapter09186a008007e02e.html

2 REPLIES

Re: 2621 Router Help

You can follow this link

There are 5 parameters that needs to be set before using tftpdnld.

Those parameters should be entered exactly asis in the document.

http://www.cisco.com/en/US/products/hw/routers/ps259/products_installation_guide_chapter09186a008007e02e.html

Community Member

Re: 2621 Router Help

171
Views
0
Helpful
2
Replies
CreatePlease to create content