Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

2900 series XL problem

Hi,

I have switch 2900 series XL losing the password and the Mode Button not work. What i can do for this problem? Please give a solution.

Wawan Kurniawan

3 REPLIES
Purple

Re: 2900 series XL problem

If you have lost the password, you can recover it using the procedure in the following document:

http://www.cisco.com/warp/public/474/pswdrec_2900xl.html

Pls do remember to rate posts.

Paresh

New Member

Re: 2900 series XL problem

Thank's Mr. Paresh for your reply.

But the problem is the Mode Button is not work or crash.

Pls another solution

Wawan Kurniawan

Re: 2900 series XL problem

Another thing you can try it to break the booting sequence. Reboot your switch and press ctrl+break key and it should take you to the rommon. It may not work on your switch but you can give it a try.

You can then follow the recovery procedure if it gets you in.

Otherwise get switch replaced as the mode button is crashed.

HTH, Please rate if it does.

-amit singh

121
Views
0
Helpful
3
Replies
CreatePlease to create content