2912F on two networks

[matthew.hendrickson]

I have a 2912F that is currently configured on one network as VLAN1 172.16.2.192/23. I need to make f0/10, f0/11, f0/12 and f1/4 be on the 172.16.200.0/23 network. What is the best way to do this?

Thanks

[Prashanth Krishnappa]

Assign those switchports you want to be on 172.16.200.0/23 network to a different VLAN. On the 2912, you can use the command "switcut port access vlan " under the interface. But remember this VLAN cannot talk to VLAN 1 unless you have a router to route between the VLANs