05-12-2006 06:37 AM - edited 03-03-2019 03:11 AM
Hi frens, i have upgrade my 2924 IOS, but when i reload my switch. This error msg comes out and i cant enter to the CLI mode. What can i do now !?!!? PLease HELP
My Upgrade Steps:
1.backup OLD IOS to TFTP
2.Delter OLD IOS in Flash
3.Copy new IOS to FLASH
4.BOOT SYSTEM with new IOS name
5.WRite mem
6.REload
7.ERROR !!!!!!
++++++++++++++++++++++++++++++++++++++++
C2900XL Boot Loader (C2900-HBOOT-M) Version 12.0(5.2)XU, MAINTENANCE INTERIM SOFTWARE
Compiled Mon 17-Jul-00 18:19 by ayounes
starting...
Base ethernet MAC Address: 00:04:c0:9c:c8:00
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 110 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 3612672
flashfs[0]: Bytes used: 2945536
flashfs[0]: Bytes available: 667136
flashfs[0]: flashfs fsck took 8 seconds.
...done Initializing Flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
Loading "c2900xl-c3h2s-mz.120-5.WC14.bin"...c2900xl-c3h2s-mz.120-5.WC14.bin: permission denied
Error loading "c2900xl-c3h2s-mz.120-5.WC14.bin"
Interrupt within 5 seconds to abort boot process.
Boot process failed...
The system is unable to boot automatically. The BOOT
environment variable needs to be set to a bootable
image.
switch: ?
? -- Present list of available commands
boot -- Load and boot an executable image
cat -- Concatenate (type) file(s)
copy -- Copy a file
delete -- Delete file(s)
dir -- List files in directories
flash_init -- Initialize flash filesystem(s)
format -- Format a filesystem
fsck -- Check filesystem consistency
help -- Present list of available commands
load_helper -- Load and initialize a helper image
memory -- Present memory heap utilization information
mkdir -- Create dir(s)
more -- Concatenate (display) file(s)
rename -- Rename a file
reset -- Reset the system
rmdir -- Delete empty dir(s)
set -- Set or display environment variables
set_bs -- Set attributes on a boot sector filesystem
set_param -- Set system parameters in flash
sleep -- Sleep a specified number of seconds
trap -- Cause a software breakpoint to occur
-- MORE --
type -- Concatenate (type) file(s)
unset -- Unset one or more environment variables
version -- Display boot loader version
++++++++++++++++++++++++++++++++++++++++
05-12-2006 07:52 AM
check the config in the ROM mode.
---use "set" to display it
maybe it was configed to use the old filename to boot the system
05-12-2006 08:04 AM
switch: set
BOOT=c2900xl-c3h2s-mz.120-5.WC14.bin
BST_TRAIL=500
MAC_ADDR=00:04:C0:9C:C8:00
MODEL_NUM=WS-C2924-XL-EN
MODEL_REVISION_NUM=A0
MOTHERBOARD_ASSEMBLY_NUM=73-3382-08
MOTHERBOARD_REVISION_NUM=C0
MOTHERBOARD_SERIAL_NUM=FAB045221KZ
POWER_SUPPLY_PART_NUM=34-0834-01
POWER_SUPPLY_SERIAL_NUM=PHI042704SY
SYSTEM_SERIAL_NUM=FAB0453M0JF
param=
switch:
05-12-2006 09:41 AM
Hi,
Try the following:
switch:flash_init
switch:load_helper
switch:BOOT=
switch:sync
switch:boot
Let me know if it works.
-amit singh
05-12-2006 09:49 AM
not work......... my precious IOS is
"c2900XL-c3h2s-mz-120.5.2-XU" .
Do i need to load back the old IOS, i got backup .....
* I think the The command should have been 'boot system flash:(image_name)'. i have missing the "flash:"
So wat can i do now ?? :-(
++++++++++++++++++++++++++++++++++++++++++++++++++++
switch: ?
? -- Present list of available commands
boot -- Load and boot an executable image
cat -- Concatenate (type) file(s)
copy -- Copy a file
delete -- Delete file(s)
dir -- List files in directories
flash_init -- Initialize flash filesystem(s)
format -- Format a filesystem
fsck -- Check filesystem consistency
help -- Present list of available commands
load_helper -- Load and initialize a helper image
memory -- Present memory heap utilization information
mkdir -- Create dir(s)
more -- Concatenate (display) file(s)
rename -- Rename a file
reset -- Reset the system
rmdir -- Delete empty dir(s)
set -- Set or display environment variables
set_bs -- Set attributes on a boot sector filesystem
set_param -- Set system parameters in flash
sleep -- Sleep a specified number of seconds
trap -- Cause a software breakpoint to occur
-- MORE --
type -- Concatenate (type) file(s)
unset -- Unset one or more environment variables
version -- Display boot loader version
switch: flash_init
Initializing Flash...
...The flash is already initialized.
switch: load_helper
switch: boot=
switch: sync
Unknown cmd: sync
switch: boot
Loading "c2900xl-c3h2s-mz.120-5.WC14.bin"...c2900xl-c3h2s-mz.120-5.WC14.bin: permission denied
Error loading "c2900xl-c3h2s-mz.120-5.WC14.bin"
Interrupt within 5 seconds to abort boot process.
Boot process failed...
switch:
++++++++++++++++++++++++++++++++++++++++++++++++++++
05-12-2006 10:43 AM
PROBLEM SOLVED !!!!
BOOT FLASH:c2900xl-c3h2s-mz.120-5.WC14.bin
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: