03-25-2004 06:00 AM - edited 03-02-2019 02:33 PM
I'm trying to configure a 2924xl switch with tacacs but failing completely. it refuses all aaa commands excep aaa new-model. and won't even let me put in a tacacs server. Using the following config:
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication enable default none
tacacs-server host 10.1.1.1
tacacs-server timeout 20
tacacs-server key xxxxx
what am i doing wrong? this works fine on a standard 2924 but the xl is a bit strange.
03-25-2004 02:27 PM
What do you mean by standard 2924? TACACS is not supported on the 2924XL, nonetheless.
03-26-2004 01:29 AM
This is not entirely true , the earlier 4 meg models of the 2924's did not support tacacs but the later 8 meg models of the 2924 did indeed support tacacs as we have both on our network .
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide