Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2948G-GE-TX P2_WARN Errors

I'm getting these errors from our switch.

2005 Dec 07 16:39:47 %SYS-4-P2_WARN: 1/Blocked queue on gigaport 5, ( 0 : 865 )

2005 Dec 07 16:39:47 %SYS-4-P2_WARN: 1/Blocked queue (rx) on ports 2/34 2/33 2/3

6 2/35 2/38 2/37 2/40 2/39

The switch is has no connections except console port. I've cycled the power on the switch, but these notifications continue. Any need for worry?

1 REPLY
Purple

Re: 2948G-GE-TX P2_WARN Errors

Yeah that looks like a hardware error . If you do a "show system" does anything show faulty ? Do a show test 0" and see if anything comes up faulty . I would say you are probably looking at replaceing it , if there are no connections except the console. You shouldn't be seeing those.

173
Views
0
Helpful
1
Replies