Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

2948G -- Gigabit uplinks

Is it possible to use the Gigabit uplink ports to connect a server?

If yes, can you recommend a gigabit nic the best works between server and switch.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Silver

Re: 2948G -- Gigabit uplinks

Gigabit uplink port can be connected to a server. You can check for Gigabit NIC in intel, and numerous vendors are available.

To know ths specfication of the GBIC link visit this link

http://www.cisco.com/warp/customer/cc/pd/si/casi/ca2900/prodlit/2948g_ds.htm

New Member

Re: 2948G -- Gigabit uplinks

Our company uses COMPAQ nics primarily. I have not seen any issues with these nics...

2 REPLIES
Silver

Re: 2948G -- Gigabit uplinks

Gigabit uplink port can be connected to a server. You can check for Gigabit NIC in intel, and numerous vendors are available.

To know ths specfication of the GBIC link visit this link

http://www.cisco.com/warp/customer/cc/pd/si/casi/ca2900/prodlit/2948g_ds.htm

New Member

Re: 2948G -- Gigabit uplinks

Our company uses COMPAQ nics primarily. I have not seen any issues with these nics...

83
Views
0
Helpful
2
Replies
CreatePlease to create content