I've a problem with one 2950T and two 1924C, connected by RJ45 cable,
they lose mac address of some jet pro boxes and one Personnal Computer !
I've read a similiable mistake in other conversation but it's a temproray solution(angtime and mac address-table), because I have other configuration like this with 2 1924 where i put in front of them a 2950 ( some them works very good)!
I upgrade the IOS of them but nothing change, i change jet pro boxes itoo !
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...