I have a 2950 switch Ver 12.1.9(EA1) that I am trying to get a set of three servers that are clustered working. The cluster works just fine on the hub currently, but nothing past the hub will find the cluster. I have tried to shut down igmp snooping, add a static arp and mac entry to the tables, but no go.
Eventually, I would like to have the three servers all plugged into the switch, but at this rate I am not going to get there.
The servers are using a multicast MAC address of 0100.5e04.0506 with an IP address of 172.16.101.214.
Do we need to ugrade to a different version of IOS?
Any thoughts/ideas/suggestions would help tremendously!!!!
Todd