Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

2950 switch: "show access-list" command does not display hit counts??

The command displays hit count for standard list 13, but not for extended list BoxOffice. I verified that the switch is filtering traffic on appplied port, yet no ACL hit count for that port. The switch is running 12.1(9)EA1 enhanced image. Any thoughts?

NYPhil-1-2950-a#show access-lists

Standard IP access list 13

permit 10.10.0.0, wildcard bits 0.0.255.255 (32 matches)

Extended IP access list BoxOffice

permit tcp any host 192.168.168.10 eq www

permit tcp any host 192.168.168.10 eq 443

deny ip any any

1 REPLY
Silver

Re: 2950 switch: "show access-list" command does not display hit

The access list is probably programmed into the TCAM hardware.

123
Views
0
Helpful
1
Replies