I am really scratching my head on this one. we have a 2950-t /24 that runs great for a month or so, then just brings the network to its knees. We are on a 100% switched network. We have our CRM, exchange,SMS, and our firewalls on the same switch. The firewalls are load balanced using Multicast IGMP and I have IGMP Snooping turned on the switch. We thought that it was a flood so we set port storm-control and set the thresholds real low. raise 10 falling 5 and every now and then it drops. I called tech support to see if this was a bad switch and was told no. Does any one have any ideas?
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...