Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

2950 to a routed 3550 port

Is there anything htat needs to be specified when connecting a 2950 to a 3550 routed port. i have a green light on the 3550 but an orange one on the 2950. also the interface ont he 2950 goes up and down. every so often i get a ping to it but mostly it times out.

2 REPLIES
Cisco Employee

Re: 2950 to a routed 3550 port

On the 2950, the interface needs to be assingned to appropriate VLAN and do a no shut. Is the interface fastethernet or gigabit ethernet? Check for any physical layer issues

New Member

Re: 2950 to a routed 3550 port

If the port on the 3550 is a routed no switchport, what vlan would need to be configured ont he 2950. i checked the cable from port to port and it's not the issue.

111
Views
0
Helpful
2
Replies
CreatePlease login to create content