Hello everyone,
I'm seeking advise to resolve my findings in Catalyst switch 2950T, The switch appears hang up when i encounter the problem while connected remotely (telnet) further invistigation shows that my uplink and their physical connection in use by the work station are just fine.
However the work station connected are experiencing a slowdown, i check my memory utilization and processor utilization but seems theyre just ok (26% for the CPU and 60% for the memory).
I attach the buffers failure listed below for a reference and to help me to determine if this is the cause of my problem.
switch12.4#sh buffers
Buffer elements:
499 in free list (500 max allowed)
11946867 hits, 0 misses, 0 created
Public buffer pools:
Small buffers, 104 bytes (total 60, permanent 25, peak 97 @ 2w0d):
60 in free list (20 min, 60 max allowed)
71530695 hits, 18267 misses, 19251 trims, 19286 created
5121 failures (0 no memory)
Middle buffers, 600 bytes (total 27, permanent 15, peak 38 @ 1w2d):
25 in free list (10 min, 30 max allowed)
3325024 hits, 1217 misses, 811 trims, 823 created
627 failures (0 no memory)
Big buffers, 1524 bytes (total 8, permanent 5, peak 82 @ 1d05h):
8 in free list (5 min, 10 max allowed)
324106 hits, 1235 misses, 1863 trims, 1866 created
484 failures (0 no memory)
VeryBig buffers, 4520 bytes (total 10, permanent 0, peak 16 @ 1d05h):
10 in free list (0 min, 10 max allowed)
199080 hits, 324 misses, 13 trims, 23 created
321 failures (0 no memory)
Large buffers, 5024 bytes (total 0, permanent 0, peak 6 @ 1d05h):
0 in free list (0 min, 5 max allowed)
9 hits, 312 misses, 16 trims, 16 created
312 failures (0 no memory)
Huge buffers, 18024 bytes (total 0, permanent 0, peak 6 @ 1d05h):
0 in free list (0 min, 2 max allowed)
5 hits, 307 misses, 16 trims, 16 created
307 failures (0 no memory)
Interface buffer pools:
Calhoun Packet Receive Pool buffers, 1560 bytes (total 512, permanent 512):
383 in free list (0 min, 512 max allowed)
66841850 hits, 0 misses
