Assuming you are referring to the 350 Aironet card/NIC. Open your Aironet client utility and ensure you are associated with an access point/or other device. If you are not then there are several configuration options that might be at Fault. I'd get with your admin to see what your SSID/LEAP Specifics/Wep Keys/etc are being used to ensure your settings are correct. There are several specific LEAP and other authentication specifics that can keep your adapter from getting connected and show "network Cable disonnected".
I have done all that. I have configured the AP myself and I am able to connect to the AP and get an IP with a laptop running Windows 98. I have the AP set up in our demo room and I have no security setting let. It has me thinking it is a windows 2000 issue.???
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...