3500 switch restarting when connecting via Console port
Whenever i connect via the console port to any 3500 switch we have it restarts itself.I open the console screen,see nothing press return a couple of times and then it restarts.Any ideas.Am i missing anything
Re: 3500 switch restarting when connecting via Console port
Could be a few differnt issues. I would look at this BugID CSCdr95976 - Windows using Dell console connection reboots switch. And another big issue could possible be with the nimda virus. You can turn off the ip http server and this will help it.
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...