Recently we have implemented gigastack on 3 3500XL in a cascaded and redundant format. However the LED on the middle switch Gbic slot(not on gigastack Gbic) showing Amber color. I am not sure if there is anything wrong with this symptom , but teh switch seems working fine at this stage.
Please advise if this is normal when configured gigastack cascaded and redundant link.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...