Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

3548XL switches constantly at 50% utilization

I have a bunch of 3548XL switches that all show the same perplexing symptom: Utilization is at a constant 50-52%, yet a "sh proc cpu | ex 0.00" command only shows processes that add up to about 20%, with the port status process at 10-12% the only thing significant going on. All switches use IOS C3500XL software (C3500XL-C3H2S-M), version 12.0(5.4)WC(1). Is this a known bug or am I overlooking something?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: 3548XL switches constantly at 50% utilization

Take a look at the following page

http://www.cisco.com/warp/customer/473/19.html

2 REPLIES
Cisco Employee

Re: 3548XL switches constantly at 50% utilization

Take a look at the following page

http://www.cisco.com/warp/customer/473/19.html

New Member

Re: 3548XL switches constantly at 50% utilization

Thanks a lot... I'll sleep much better now! ;-)

111
Views
0
Helpful
2
Replies