03-08-2004 03:58 PM - edited 03-02-2019 02:07 PM
There is a problem, when I connect Catalysts 3550-24T to Extreme switch with 10-full and any port settings, the connection gives some number of CRC errors.but if replace catalyst 3550-24T with 3524, there is no CRC.
firt i suspected the hardware fault or IOS bug,so reconnected with other catalyst 3550-24T & IOS, but there was same symptom.
also when connecting 3550-24T with 3524 each other, there is no problem.
i can't figure it out.
plz let me know any information about it
thanks
03-12-2004 12:09 PM
I guess the older IOS versions of 3550 IOS have some incompatablity issues, Try upgrading the 3550 to a version later than 12.1(14)EA1 this may solve your problem. refer this link for more
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00800a7af0.shtml#appb
03-14-2004 03:29 PM
thank you for your reply.
I had tested it with 12.1(14)ea1 & 12.1.(19)ea1. but it had been same result.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: