Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3550 EMI working as SMI

I have bought an EMI 3550 switch, and I cannot configure ospf. It seems like it is working like an SMI one. In the box it shows that it is EMI and you can see in the show version the same:

"Model number: WS-C3550-48-EMI"

It has the latest IOS "Version 12.1(13)EA1a"

TIA

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: 3550 EMI working as SMI

What is the file name of your IOS?

c3550-i9q3l2-mz.121-13.EA1a.bin is SMI

c3550-i5q3l2-mz.121-13.EA1a.bin is EMI

You can download the EMI image if needed from

http://www.cisco.com/cgi-bin/tablebuild.pl/cat3550

4 REPLIES
New Member

Re: 3550 EMI working as SMI

Once in global configuration mode do you have the router ospf option available or no?

Here's a helpful link for configuring OSPF on the 3550.

http://www.cisco.com/en/US/products/hw/switches/ps646/products_configuration_guide_chapter09186a008014f34f.html#58140

Hope this helps.

Josh

Cisco Employee

Re: 3550 EMI working as SMI

What is the file name of your IOS?

c3550-i9q3l2-mz.121-13.EA1a.bin is SMI

c3550-i5q3l2-mz.121-13.EA1a.bin is EMI

You can download the EMI image if needed from

http://www.cisco.com/cgi-bin/tablebuild.pl/cat3550

New Member

Re: 3550 EMI working as SMI

Not to ask the obvious, but did you remember to turn on 'ip routing' before configuring 'router ospf X'?

-A

New Member

Re: 3550 EMI working as SMI

Yes, I put the "ip routing".

The problem was that I put a SMI image instead of a EMI one.

Regards.

127
Views
0
Helpful
4
Replies