3550 IOS 12.1.13.EA1a SMI image has L2/L3 routing code
I've just downloaded the file c3550-i9q3l2-mz.121-13.EA1a.bin which is described as the SMI image for the 3550. However, when loaded, "show ver" shows this new image file is loaded but is running the L2/L3 switching image, which is what I would expect only on the EMI image. In fact, both c3550-i9q3l2-mz.121-13.EA1a.bin (SMI) and c3550-i5q3l2-mz.121-13.EA1a.bin (EMI) images show L2/L3 switching, and support the "ip routing" command.
Are these files mis-named, or am I missing something?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...