3550 PBR

[aachen]

IOS=c3550-i5q3l2-mz.121-13.EA1a

The 3550 display next message when I configured:

3550#conf t

Enter configuration commands, one per line. End with CNTL/Z.

3550(config)#int vlan 1

3550(config-if)#ip policy route-map ABC

3550(config-if)#end

00:30:06: %L3TCAM-3-SIZE_CONFLICT: PBR requires enabling extended routing

What is the extended routing? How enabled?

Thanks so much!

[ahojmark]

Do you have 'ip routing' turned on?

-A

[aachen]

Hi sir:

Yes, in gobal command.

[jawad1979]

Check the L3TCAM Messages in the following link:

http://www.cisco.com/en/US/products/hw/switches/ps646/products_system_message_guide_chapter09186a00800c6eab.html#xtocid11

Good luck