I am looking at a proposal that will use a 3550-24-EMI switch at the core, which in turn will connect up to twenty remote sites (over 10mb LES circuits). Each of these remote sites will have maybe two or three vlans. at each remote site, I can either use a 1760 router or another 3550 switch.
I have been told that there is a limitation to how many WAN routed vlans the 3550 can support (approx 16-18), but when I look at the documentation, all I can see is the standard 1005 vlan statements.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...