Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

3560 VLAN rate-limiting

I am trying to configure rate limiting on a per VLAN basis on a 3560 switch. The VLAN interface accepts the configuration commands, but the rate is not being limited. Rate limiting does work, however, when I configure it on a per port basis.

Does anyone know if per VLAN rate limiting is possible, and if so, how?

Thank You.

1 REPLY
Silver

Re: 3560 VLAN rate-limiting

configure "mls qos vlan-based" on all interfaces in the specified vlan(X)

interface GigabitEthernet1/0/1

mls qos vlan-based

interface GigabitEthernet1/0/2

mls qos vlan-based

......

apply the policy-map under interface Vlan X

interface Vlan X

service-policy input ip_rate_limit (or rate_limit)

check out the following URL for more detail :

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12225sec/3750scg/swqos.htm

423
Views
0
Helpful
1
Replies
CreatePlease login to create content