Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

3620 with digital modems Windows PPP Client

Trying to get Windows95/98/2k to dial into a 3620 with E1 interface and 30 digital modems. The user connects, is authenticated on RSA but the connection never completes.

interface Group-Async1

ip unnumbered FastEthernet0/0

encapsulation ppp

ip tcp header-compression passive

async default routing

async mode interactive

peer default ip address pool setup_pool

ppp authentication chap pap

group-range 33 62

line 33 62

autoselect during-login

autoselect ppp

modem InOut

modem autoconfigure discovery

autocommand ppp

transport input all

flowcontrol hardware

If the client enables the terminal window after connection it works ok. But we don't want this.

  • Other Network Infrastructure Subjects
1 REPLY
Anonymous
N/A

Re: 3620 with digital modems Windows PPP Client

If the user does connect, and is

authenticated, then you should have

a look at the following to try and

understand who and why the connection

is being torn down.

debug ppp neg

debug modem

debug isnd q931

debug aaa author

debug aaa authen

Try to only enable this for one dialin

user.

89
Views
0
Helpful
1
Replies
This widget could not be displayed.