3640 Configuration

[krsschool]

I have a 3640 Router with t1/e1 module and 2 fast ethernet modules. I want to prioritize the traffice to/from the different ethernet/fastethernet modules through the serial interface. FE 1/0 highest priority, FE 2/0 Medium, and E 0/0 lowest. Any suggestions welcome.

Thanks

[loralubo1]

You can use policy routing on the three interfaces to set the IP Precedence of the incoming packets and then use some of the QoS mechnisms using IP Precedence.

Hope this helps.

Lora