Can this be fixed, I cant get out of rommon mode. I desperatly need this router for practice so if anyone can help I would appreciate it.
3600 Software (C3640-JS-M), Version 12.0(13), RELEASE SOFTWARE (fc1)
Compiled Tue 05-Sep-00 21:39 by linda
Image text-base: 0x60008918, data-base: 0x60C10000
ERROR in NVRAM sizing. NVRAM could be bad!
Hardware indicated 131072 bytes. Software detected 0 bytes.
Using 0 bytes.
=== Flushing messages () ===
Queued messages:
00:00:02: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
00:00:01: %C3600-3-BADNV: Detected invalid NVRAM size: -2056 bytes
No fault history 0xFFFFFFFF. Need 11.1 (2) or higher ROM
*** System received a Bus Error exception ***
signal= 0xa, code= 0x8, context= 0x61176310
PC = 0x602642f4, Cause = 0x20, Status Reg = 0x34018002
environment write to NVRAM failed
System Bootstrap, Version 11.1(20)AA1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
Warning: monitor nvram area is corrupt ... using default values
ÿ
ERROR in NVRAM sizing. NVRAM could be bad!
Hardware indicated 131072 bytes. Software detected 0 bytes.
Using 0 bytes.
C3600 processor with 65536 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
