Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

3640 sudden stucks

Hi All,

I Have a cisco 3640 with following spesc.

Cisco Internetwork Operating System Software

IOS (tm) 3600 Software (C3640-JS-M), Version 12.1(5)T9, RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2001 by cisco Systems, Inc.

Compiled Sun 24-Jun-01 14:08 by cmong

Image text-base: 0x60008950, data-base: 0x6147C000

ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

cisco 3640 (R4700) processor (revision 0x00) with 60416K/5120K bytes of memory.

Processor board ID 25042502

R4700 CPU at 100Mhz, Implementation 33, Rev 1.0

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

TN3270 Emulation software.

4 Ethernet/IEEE 802.3 interface(s)

1 FastEthernet/IEEE 802.3 interface(s)

4 Serial network interface(s)

8 Low-speed serial(sync/async) network interface(s)

DRAM configuration is 64 bits wide with parity disabled.

125K bytes of non-volatile configuration memory.

32768K bytes of processor board System flash (Read/Write)

20480K bytes of processor board PCMCIA Slot0 flash (Read/Write)

This router stuck 3 to 4 times in a month.

Also there is average 32% load on the router.

I was not been able to find out why it stucks

Any one can help me out how can I come to know about its reason of stucking .

Farooq

Netwrok Admin

1 REPLY
Bronze

Re: 3640 sudden stucks

126
Views
0
Helpful
1
Replies
CreatePlease to create content