I've got a Cisco 3661 router running with 2 slots occupied by two 4 ports WIC card (4MT). We also have three fiber links all connected to a 2924 Cisco fiber switch. We are thinking of removing the switch and connect the fiber connection to the routers.
What I know from the manual is that NM-1FE-FX module (one fiber port) is the only available module for my option. I ve got 4 more empty slots left on this router. Since I got 3 fiber links, that will mean I will have to buy 3 modules to cater for that. That will mean I will be left only with one slot.
Is there a module that I can buy that have 3 or 4 FX port in one ?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...