you need not buy anything for stacking, by default, cisco 3750 switches has got stacking port back side of the device & it will along with a stacking cable, so you can stack 5 cisco 3750 switches. maximum stacking capability is 32Gbps.
Notice that if you put cable management units (single or double) between each switches, the first switch and last switch inthe stack might be too far away. Each cisco 3750 switch comes with a 50 cm stack cable. If you think that the distance between the stack connectors of the first and last switch in the stack is more than 50 cm, you will need to buy a 1 m stack cable for extra $$$. Keep that in mind.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...