Brand new 3825 with c3825-advipservicesk9-mz.124-3c.bin IOS
Installed NME-XD-24ES-1S-P module
Router does not see module, module has flashing green SYST and flashing amber STAT LED's.
So, dead module or am I missing something?
First thing i would suggest is to reseat the module and check for the same.
Once that is done check out whether the reqd s/w code available in the module.
You need to have 12.2(25)EZ installed in the switching module.
for more info on the compatibility matrxi do refer this link..
Service Module is Cisco GigabitEthernet2/0
Service Module supports session via TTY line 130
Service Module is waiting for registration message
Service Module reset on error is disabled
Service Module status is not available
Is what I get when querying the module. What is the registration message?
OK, muppet error on my part.
Got into the swirch, was in ROM ! Booted it and it came up. Now to configure.
Anyone with hints and tips, please feel free!
2 -rwx 114614
3 -rwx 1392
4 -rwx 5
371 -rwx 105
373 drwx 192
when I try to boot module i get
Loading "c3750-ipbase-mz.122-25.EZ"...c3750-ipbase-mz.122-25.EZ: no such device
Error loading "c3750-ipbase-mz.122-25.EZ"
Interrupt within 5 seconds to abort boot process.
File "flash:/miragenet" uncompressed and installed, entry point: 0x711b0
CPU: IBM PowerPC 405/Yeti: clock 125 (MHz)
DRAM: 128MB (0x8000000 Bytes)
Diagnostic Monitor for TEST, Version 1.1.1(44)
Compiled by bbuu on Tue 28-Jun-05 09:39
diagmon 1 >
What I am I doing wrong NOW?
The router is working fine on 3825 adv sec IOS.
The switch module runs on 3750 IOS and it looks like a corrupt image on the switch module. As its brand new I am returning it to the supplier for fix/replace.