03-24-2004 07:35 AM - edited 03-02-2019 02:31 PM
Hi,
I have a terible problem. I use 3Com PRO TA connected on c1721 + WIC-2A/S as dial-in server and 3Com PRO TA as dial-in modem, too.
I get the folowing log:
1d02h: TTY1: DSR came up
1d02h: tty1: Modem: IDLE->(unknown)
1d02h: TTY1: EXEC creation
1d02h: TTY1: set timer type 10, 30 seconds
1d02h: TTY1: Autoselect(2) sample 7E
1d02h: TTY1: Autoselect(2) sample 7EFF
1d02h: TTY1: Autoselect(2) sample 7EFF7D
1d02h: TTY1: Autoselect(2) sample 7EFF7D23
1d02h: TTY1 Autoselect cmd: ppp negotiate
1d02h: TTY1: EXEC creation
1d02h: TTY1: create timer type 1, 600 seconds
1d02h: TTY1: destroy timer type 1
1d02h: TTY1: no timer type 0 to destroy
1d02h: TTY1: no timer type 2 to destroy
1d02h: TTY4: autoconfigure probe started
1d02h: %LINK-3-UPDOWN: Interface Serial0, changed state to up
1d02h: TTY1: Async Int reset: Dropping DTR
1d02h: TTY1: DSR was dropped
1d02h: tty1: Modem: READY->(unknown)
1d02h: TTY1: dropping DTR, hanging up
1d02h: tty1: Modem: HANGUP->(unknown)
1d02h: %LINK-5-CHANGED: Interface Serial0, changed state to reset
Does anyone know why it start disconnect yust before LCP ???
Does anyone has a similar configuration ???
THANKS
Solved! Go to Solution.
03-26-2004 12:33 PM
We need to see the config as it looks like the router is configured for EXEC connection..not PPP. So post the config here.
03-26-2004 12:33 PM
We need to see the config as it looks like the router is configured for EXEC connection..not PPP. So post the config here.
03-26-2004 07:01 PM
Hi ,
I have solved the problem. Some locking speed problem between modems and "exec" comand in serial interface
Thanks for answering
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide