Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

3com switch

hi,

Do any body know how to do a password recovery of a 3com switch ? I am having a 3cOM 3300 SWITCH

shanky

4 REPLIES
New Member

Re: 3com switch

Have you tried the following which are default passwords

security security

manager manager

Or if you can get in via the Web Interface try the following

Login Manager

Password - password

or

Security

Security

Other than that remove the battery backup if you have direct access to it this will default the box and return to login of admin with no password

Nothing on the 3Com site for this one

Regards

Mark

New Member

Re: 3com switch

Hi,

You can recover the default passwords by doing software upgrade via console port. Unfortunately you lose all other configuration too, as the unit initializes config.

Rgds,

/Pete

New Member

Re: 3com switch

Hi,

in earlier versions of SS3300 (2 years ago) you could recover the password with the foillowing procedure:

1. Power on the switch

2. When ALL LEDs are lit, press the reset button on the back (perhaps twice)

3. On the serial console you should see a ">" prompt

4. Type "RIP 0000", all caps, space and the four times 0

5. type b

I did it once a while back and it worked

Mathias

New Member

Re: 3com switch

Have you tried "security / security" and / or "admin / admin"?

Barry

179
Views
0
Helpful
4
Replies
CreatePlease login to create content