Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

4006 4232-L3 module problem

On 4232-L3 module console, messages pops up:

16:53:22: FX1000 ISR: packet with input_if or input_idb as NULL

16:53:22: tmp_head = 160

16:53:22: 00 00 00 F0 FF FF FF FF FF FF 00 07 EC 2C FC 09

16:53:22: 81 00 00 24 08 06 00 01 08 00 06 04 00 01 00 07

16:53:22: EC 2C FC 09 C0 A8 88 01 00 00 00 00 00 00 C0 A8

16:53:22: 88 37 00 00 00 00 00 00 00 00 00 00 00 00 00 00

16:53:22: FX1000 ISR: packet with input_if or input_idb as NULL

16:53:22: tmp_head = 161

16:53:22: 00 00 00 F0 FF FF FF FF FF FF 00 07 EC 2C FC 09

16:53:22: 81 00 00 24 08 06 00 01 08 00 06 04 00 01 00 07

16:53:22: EC 2C FC 09 C0 A8 88 01 00 00 00 00 00 00 C0 A8

16:53:22: 88 37 00 00 00 00 00 00 00 00 00 00 00 00 00 00

and the L3 module failed (can't ping) once or twice in a day, and all the Vlans can't communicate with each other at all, reset the L3 module, the network function was normal again. what is the problem?

Thanks.

Kevin

xuxuexin@hotmail.com

2 REPLIES
Silver

Re: 4006 4232-L3 module problem

Kevin,

Could you share a bit more information on this pls. Code Version (L3 Module/Sup? Do you have anything in the logging buffer other than what you've pasted in here?

Do you have a crash_info in your bootflash? I would imagine this would be a HW / SW issue but need more information to be certain.

Thanks,

Don

Bronze

Re: 4006 4232-L3 module problem

Please upgrade to the latest software there was some memory leaks issues in the earlier version and if the problem persists please contact the TAC.

145
Views
0
Helpful
2
Replies
CreatePlease to create content