Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

4006 and route-map / set ip next-hop

Hi,

I have a 4006 w/ Sup III, and at present it has a single default gateway.

What I need to do is identify traffic from a particular range, and change the gateway that the traffic is sent to.

On a router, I would do this:

access-list 10 permit 20.20.20.20 0.0.0.0

route-map TestNet permit 10

match ip address 10

set ip next-hop 10.10.10.10

int e0

ip policy route-map TestNet

Can I do something similar on the 4006? I've noticed that I can't do a "ip policy" command on VLAN1, which presents a problem straight up.

IOS 12.1(8a)EW.

Cheers,

Mike.

1 REPLY
Bronze

Re: 4006 and route-map / set ip next-hop

policy routing is not supported on the cat4000 sup 3 at this point but it 'll be in the next release- which 'll be releasing soon.

101
Views
0
Helpful
1
Replies
CreatePlease to create content