10-21-2002 12:12 PM - edited 03-02-2019 02:15 AM
Quick Question..... Does the 4006 supII have vtp version 2 enabled by default or do I have to manually enable it? Here is what my config shows......
Domain Name Domain Index VTP Version Local Mode Password
----------------------- --------- ---------- ------------- --------- ----------
N/A 1 2 server configured
Vlan-count Max-vlan-storage Config Revision Notifications
---------- ---------------- --------------- -------------
15 1023 0 disabled
Last Updater V2 Mode Pruning PruneEligible on Vlans
--------------- -------- -------- ------------- ------------
disabled disabled 2-1000
As you can see V2 Mode is disabled. Does this mean that VTP v.2 is disabled even though it shows vtp version 2 ???? I'm confused, can anyone give advice. ~Thanks in advance
10-21-2002 12:40 PM
It is disabled by default. The "VTP Version" field indicates that the switch is v2 capable.
There is typically no reason to enable v2 unless you have 5K's with token ring in your network.
10-21-2002 12:42 PM
Thank you very much ;-)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide