I am facing a typical problem in my 4006 chasis the os is 5.5 , the cpu utilisation is more than 70% thoughout the day, I am attaching output of show process cpu for reference, can someone please suggest me what could be the problem.
CPU utilization for five seconds: 95.50%
one minute: 94.16%
five minutes: 93.05%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
There is no increment in xmit-err on unconnected ports, also i have gone through the document, I found that there are more number or xmit broadcast's, multicast's and unicast's. but this is not being reflected in process cpu, will the broadcast's effect the cpu utilisation? if yes what are the ways by which broadcasts, multicasts and unicasts can be reduced?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...