Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

4006 problem help ! ! ! when issue "show ip arp" , the 4006 will halt.

The problem is as title, who can help me ,many thanks!

2 REPLIES
Cisco Employee

Re: 4006 problem help ! ! ! when issue "show ip arp" , the 4006

What kind of Supervisor Engine do you have? Can you post the output of sh ver and sh ip arp? Does it happen all the time?

Community Member

Re: 4006 problem help ! ! ! when issue "show ip arp" , the 4006

switch#sh ver

Cisco Internetwork Operating System Software

IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-IS-M), Version 12.1(8a)EW1, E

ARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Wed 20-Feb-02 18:02 by eaarmas

Image text-base: 0x00000000, data-base: 0x00AA30DC

ROM: 12.1(12r)EW

zbgov uptime is 2 days, 50 minutes

System returned to ROM by reload

System image file is "bootflash:cat4000-is-mz.121-8a.EW1.bin"

cisco WS-C4006 (MPC8245) processor (revision 7) with 262144K bytes of memory.

Processor board ID FOX06350LC3

Last reset from Reload

8 Gigabit Ethernet/IEEE 802.3 interface(s)

467K bytes of non-volatile configuration memory.

Configuration register is 0x2102

It happens at the time that the burden of switch's cpu over 90%

103
Views
0
Helpful
2
Replies
CreatePlease to create content