Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

4006 SC0 interface

If I didn't want to use the me1 nor sl0 interface for addressing.....is the SC0 interface pretty much my only option left for management addressing? I can't telnet to it from a workstation because it is an in-band interface versus out-of-band like the others. I can only telnet to it from layer 2 devices such as another switch. Can anyone confirm this???

2 REPLIES
Cisco Employee

Re: 4006 SC0 interface

sc0 is the only interface you can use for management purpose(ping/telnet). me1 is for disaster recovery only

http://www.cisco.com/warp/public/473/8.html

Check to see if you have any permit list set up. If you do, try disabling it and try to telnet

http://cio.cisco.com/univercd/cc/td/doc/product/lan/cat4000/rel6_3/cmd_ref/set_e_l.htm#42699

Cisco Employee

Re: 4006 SC0 interface

Yes Sco is your only option left if you don't want to use any other interface. This provide the remote management to the switch. You can telnet to the switch from anywhere ( from different networks if the default gateway is defined) and from any decive which can run the telnet client, mean any workstation.

Here is the URL for more reference

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/7_3/config/supcfg.htm

314
Views
0
Helpful
2
Replies