Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

4006 with supervisor II using SPAN function

Here is my config on supervisor II

Console> (enable) show span

Destination : Port 4/10

Admin Source : VLAN 2

Oper Source : Port 2/3,2/5-6

Direction : transmit/receive

Incoming Packets: enabled

Learning : enabled

Filter : -

Status : active

-----------------------------------------

Total local span sessions: 1

Is it correct ??

I try to connect IDS 4235 with 4.0 version on port 4/10 to monitor VLAN2

when I try to use a TCP-RESET action on IDS

It does not work , why ??

1 REPLY
Bronze

Re: 4006 with supervisor II using SPAN function

IDS can send TCP-resets through SPAN ports, better check your config

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_6_2/_config/span.htm

82
Views
4
Helpful
1
Replies
CreatePlease to create content