Is there a way I can schedule at Catalyst 4224 to reload?
The reason I want to reload it is that it is a production phone switch and it has several problems which are all temporarily resolved by reloading the router. It works well for 3 - 7 days after that before the problems return.
Just in case there is interest, problems are: built-in fxs ports stop responding to incoming and outgoing calls after a few days of being up, when telneting into the router via the lan or wan it has a sluggish response when echoing commands.
What IOS are you running? I know the first rev. for the 4224 had issues. Mine was loosing connectivity to end stations so I upgraded to the latest IOS version. You should be able to do a scheduled reload. Have you tried "relaod in ?"
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...