Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

4500 SFP supervisor ports inactive

We need to use the SFP ports on the supervisor modules, problem is that they are on inactive rather than nonconnect.

Probably an easy one...

switch#sh mod

Chassis Type : WS-C4510R

Power consumed by backplane : 40 Watts

Mod Ports Card Type Model

---+-----+--------------------------------------+--------------

1 6 Sup V-10GE 10GE (X2), 1000BaseX (SFP) WS-X4516-10GE

2 6 Sup V-10GE 10GE (X2), 1000BaseX (SFP) WS-X4516-10GE

3 48 10/100BaseTX (RJ45)V, Cisco/IEEE WS-X4248-RJ45V

4 48 10/100BaseTX (RJ45)V, Cisco/IEEE WS-X4248-RJ45V

5 48 10/100BaseTX (RJ45)V, Cisco/IEEE WS-X4248-RJ45V

switch#sh int status mod 1

Port Name Status Vlan Duplex Speed Type

Te1/1 notconnect 1 full 10G No X2

Te1/2 inactive 1 full 10G No X2

Gi1/3 inactive 1 full 1000 1000BaseLH

Gi1/4 inactive 1 full 1000 1000BaseLH

Gi1/5 inactive 1 full 1000 1000BaseLH

Gi1/6 inactive 1 full 1000 1000BaseLH

1 REPLY
Cisco Employee

Re: 4500 SFP supervisor ports inactive

Hi Mark,

Simply configure "hw-module uplink select gigabitethernet"

documented here:

http://www.cisco.com/en/US/partner/products/hw/switches/ps4324/products_command_reference_chapter09186a00803ff0cf.html#wp1505563

HTH,

Bobby

*Please rate helpful posts.

1419
Views
0
Helpful
1
Replies
CreatePlease to create content