Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

4506- 12.2.25SG Sup2+ 'sho policy-map int' output

-IOS command 'sho policy-map int fa 3/x' doesnot show value for only one interface rather it shows cumulative value for all interfaces. Could be a bug in IOS ?

IOS: cat4500-ipbasek9-mz.122-25.SG.bin

#sho policy-map int fa3/6

FastEthernet3/6

Service-policy input: untrusted_model

Class-map: voice_trafic (match-all)

16626976 packets

Match: access-group name voice_trafic

QoS Set

ip dscp ef

Class-map: voice_signaling (match-all)

75954 packets

Match: access-group name voice_signaling

QoS Set

ip dscp ef

Class-map: class-default (match-any)

174134940 packets

Match: any

QoS Set

ip dscp default

#sho policy-map int fa3/5

FastEthernet3/5

Service-policy input: untrusted_model

Class-map: voice_trafic (match-all)

16636254 packets

Match: access-group name voice_trafic

QoS Set

ip dscp ef

Class-map: voice_signaling (match-all)

75954 packets

Match: access-group name voice_signaling

QoS Set

ip dscp ef

Class-map: class-default (match-any)

174161775 packets

Match: any

QoS Set

ip dscp default

#sho policy-map int fa3/5

FastEthernet3/5

Service-policy input: untrusted_model

Class-map: voice_trafic (match-all)

16639246 packets

Match: access-group name voice_trafic

QoS Set

ip dscp ef

Class-map: voice_signaling (match-all)

75954 packets

Match: access-group name voice_signaling

QoS Set

ip dscp ef

Class-map: class-default (match-any)

174167019 packets

Match: any

QoS Set

ip dscp default

#sho policy-map int fa3/5

FastEthernet3/5

Service-policy input: untrusted_model

Class-map: voice_trafic (match-all)

16641517 packets

Match: access-group name voice_trafic

QoS Set

ip dscp ef

Class-map: voice_signaling (match-all)

75954 packets

Match: access-group name voice_signaling

QoS Set

ip dscp ef

Class-map: class-default (match-any)

174175910 packets

Match: any

QoS Set

ip dscp default

#

  • Other Network Infrastructure Subjects
2 REPLIES
Bronze

Re: 4506- 12.2.25SG Sup2+ 'sho policy-map int' output

The show policy-map interface command displays the packet statistics for classes on the specified interface or the specified PVC only if a service policy has been attached to the interface or the PVC.

check out the following link for the command reference :

http://www.cisco.com/en/US/products/sw/iosswrel/ps5187/products_command_reference_chapter09186a008017cf12.html#wp1146884

New Member

Re: 4506- 12.2.25SG Sup2+ 'sho policy-map int' output

So, this infact provides a cumulative value. Any command to provide values for individual interface ?

176
Views
0
Helpful
2
Replies