11-01-2002 12:23 PM - edited 03-02-2019 02:34 AM
Can the 4506 supply power to both radio's A&B in the AP 1200? (11 watts)
DO the ports in the WS-4148-RJ45V supply more than 6.3 watts because the AP 1200 with both radios A&B require 11 watts?
If the 4506 cannot supply 11 watts, does this mean a Power Injector must be used with the AP 1200 for both radios?
11-01-2002 12:28 PM
Did you opt to choose a power transformer (AC) which comes usually along with the AP 1200, or you opted for a power injector. Power injector is needed for Power over Ethernet connections while using in conjuction with the AP1200, with 802.11 a and dual radio 802.11a/802.11b configurations.
For 802.11b only configurations, you can use the inline power switch module you have.
Remember if you have to get a power injector, you have to pay from your pocket extra. while the power transformer that comes with AP1200 is shipped free along with the unit.
11-04-2002 12:08 PM
Definitely requires a power transformer or injector for dual A/B operation - though with 802.11af support in future blades that should be a non-issue. But you'll have to wait until they are available.
Ken Johnson
LeTourneau University
--------------------------------
CIPTUG
Cisco IP Telephony Users Group
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: