Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

4506 with supIII

If I have a 4506 with a sup III module should it have layer 3 capability by default. If so how do you access the layer 3 services.

We have on in the field that has a WS-X4014. The switch is currently configured in CAT OS Mode. Session is not an option for accessing the supervisor at layer 3. The software on the sup module is 12.1(12c)EW1.

2 REPLIES
Cisco Employee

Re: 4506 with supIII

Sup3/4 for CAT4500/4000 run integrated IOS. You would configure it just like a router. You can find configuration guidelines at

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/12_1_19/index.htm

Re: 4506 with supIII

The 4500 series does not have a seperate RSP module. Its built into the SUP engine of the L3 switch. Session command doesnt work here. you need to directly configure the desired VLAN interfaces and do a static or dynamic routing.

All required IP addresses for VLANs should be configured on the VTP server. Other VTP client switches will have only L2 information.

113
Views
0
Helpful
2
Replies
CreatePlease to create content